wangwenyufeng 发表于 2012-11-16 15:02:58

ug6.0转化图档时总是失败

用ug转成step图档，转单个零件没问题，当转装配图时，总是转不出来，log文件显示如下
UG to STEP
! INFO-   NX STEP AP214 - V6.0
! INFO-      
! INFO-   Start of Translation: 16-NOV-20122:58:59 PM
! INFO-      
! STATUS-   Converting Part: E:\2012 work\box20121114\Leo To Connie\Wuling LH ME Data\TTI 3D20120709\Aurora assy_v16TTI.prt
! ERROR-   
! ERROR-    IM0541 The following error message(s) were returned from UG
! ERROR-         at part_load:
! ERROR-   
! ERROR-         E:\2012 work\box20121114\Leo To Connie\Wuling LH ME Data\TTI 3D20120709\Aurora assy_v16TTI.prt
! ERROR-             -Update undo happened.
! ERROR-   
! ERROR-    Unable to retrieve E:\2012 work\box20121114\Leo To Connie\Wuling LH ME Data\TTI 3D20120709\Aurora assy_v16TTI.prt:
! ERROR-    Update undo happened.
! ERROR-   
! ERROR-    IM0511 Processing input part failed for E:\2012 work\box20121114\Leo To Connie\Wuling LH ME Data\TTI 3D20120709\Aurora assy_v16TTI.prt
! INFO-      
! INFO-   End of Translation: 16-NOV-20122:59:32 PM
! INFO-      

jiaojianyaya 发表于 2012-11-16 17:44:04

不太清楚，你升级一下6.0看看，或者直接尝试高版本
页: [1]
查看完整版本: ug6.0转化图档时总是失败