myduo2008 发表于 2017-9-1 16:22:57

牛                                    

xugang713* 发表于 2017-9-9 16:45:00

学习学习学习

等待爱情* 发表于 2017-9-10 00:02:47

dsdgdhhj

蕞噯佬嘙zhao_we 发表于 2017-9-10 06:44:40

感谢楼主分享

546972940 发表于 2017-9-10 15:43:09

谢谢分享 论坛有你更精彩

yrsd 发表于 2017-9-10 21:10:53

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
0. If you have "MultiKey_18.1_x64" (by SSQ) emulator for Mastercam 2017 installed skip emulator setup (step 3-5), just register new dump "MasterCAM_45874_hasp_dealer.reg" and restart emulator


1. Install Mastercam 2018 (build 20.0.14713.0). At setup select "SIM Type > HASP". Do not run Mastercam at the end of setup

2. Uninstall previouse USB-emulatot for Mastercam X5-X9 64-bit (if exist)

3. Copy folder "MultiKey_18.1_x64_31052017" to your computer

4. Run "MasterCAM_45874_hasp_dealer.reg" and confirm to add info into Windows Registry

5. Run as Administrator MultiKey_18.1_x64_31052017\install.cmd and wait until new devises and drives for them will be found and installed

6. Run <mcam2018 program folder>\NHaspX.exe. Be sure that "SIM type > HASP" is selected

7. Run <mcam2018 program folder>\HaspX.exe. Be sure that HASP is found

8. Enjoy



Cracked by TeAM SolidSQUAD-SSQ

136517215 发表于 2017-9-11 22:59:25

37ye

taoyang 发表于 2017-9-24 11:30:44

Good!!!!

gong5621* 发表于 2017-9-25 10:15:31

好东西，学习

ugcsxx 发表于 2017-9-26 11:16:52

学习学习
页: 36 37 38 39 40 41 42 43 44 45 [46] 47 48 49 50 51 52 53 54 55
查看完整版本: MasterCAM后处理修改5圆弧输出方式讲解