论坛 › UG后处理 › UG后处理程序头带刀具单与换刀前输出序列号N代码

周会888888 发表于 2019-3-8 16:51:52

#PB_CMD_TOOL_INFO

set outputthd 1
global mom_tool_name
global mom_tool_diameter
global mom_tool_corner1_radius
set tdi [ format"%.2f" $mom_tool_diameter]
set tr [ format"%.2f" $mom_tool_corner1_radius]
MOM_output_literal "($mom_tool_name,D$tdi,R$tr)"

global mom_tool_adjust_register
global mom_cutcom_adjust_register
global mom_tool_adj_reg_defined
global mom_tool_number

if {
    set tt $mom_tool_number
} else {
    set tt 0
}
if {$mom_tool_adj_reg_defined == 1} {
    set th $mom_tool_adjust_register
} else {
    set th 0
}
if {
    set td $mom_cutcom_adjust_register
} else {
    set td 0
}
set tt
set th
set td

if {$outputthd == 1 } {
    #MOM_output_literal "(T$tt,H$th,D$td#)"
} else {
    #MOM_output_literal "(T00,H00,D$td#)"
}

global mom_stock_part side
global mom_stock_floor
global mom_stock use floor same as side
global mom_operation_type
global mom_motion_type
set xystock 0
set zstock 0

if {
    set xystock
    set zstock
}
if {$mom_operation_type == "point to point"} {
    set xystock 0
    set zstock 0
}
MOM_output_literal "(XY=, Z=)"

#output tool info
global ptp_file_name
global tool_lists_file_name
global ino
global mom_group_name mom_output_file_suffix mom_output_file_basename
global mom_sys_max_travel
global mom_sys_min_travel
global mom_machine_time
set tool_lists_file_name ${ptp_file_name}_toollists
if {!} {
    set ino 1
    if {} {
    MOM_remove_file $tool_lists_file_name
    }
}
set tfile
if {$ino > 1} {
    puts $tfile "(T$tt $mom_tool_name D$tdi R$tr H$th ZMIN=)"
}



set mom_sys_max_travel(2) -9999.999
set mom_sys_min_travel(2)9999.999
set ino
close $tfile

1123456787 发表于 2019-3-9 06:41:25

谢谢楼主，辛苦了

ysaong521 发表于 2019-3-11 11:48:57

我看看

15871031062 发表于 2019-3-11 13:43:49

6666666

xdhxj 发表于 2019-3-11 17:21:01

{:smile:}{:smile:}{:smile:}{:smile:}{:smile:}{:smile:}{:smile:}{:smile:}{:smile:}

威风凛凛* 发表于 2019-3-11 19:10:21

非常好

乱乱小情绪 发表于 2019-3-11 20:36:38

刚好用到，学习一下

幸福需要创造 发表于 2019-3-11 23:27:21

6666666

kendar 发表于 2019-3-12 17:45:56

小梁永远是经典

13555998958 发表于 2019-3-13 14:15:37

6666666666

查看完整版本: UG后处理程序头带刀具单与换刀前输出序列号N代码