UG自带后处理生成的程序错误的在法兰克系统中用不了，刀具轨迹正确
%N0010 G40 G17 G90 G70
N0020 G91 G28 Z0.0
:0030 T02 M06
N0040 G0 G90 X-1.4891 Y-1.8923 S1500 M03
N0050 G43 Z.7874
N0060 Z.1181
N0070 G1 Z0.0 F9.8
N0080 X-1.6186 Y-1.7742
N0090 G2 X-1.7742 Y-1.6186 I1.6186 J1.7742
N0100 G1 X-1.8923 Y-1.4891
N0110 Z.1181
N0120 G0 Z.7874
N0130 X-1.2917 Y-1.8923
N0140 Z.1181
N0150 G1 Z0.0
N0160 X-1.4375 Y-1.7742
N0170 G2 X-1.7742 Y-1.4375 I1.4375 J1.7742
N0180 G1 X-1.8923 Y-1.2917
N0190 Z.1181
N0200 G0 Z.7874
N0210 X-1.0725 Y-1.8923http://img.baidu.com/img/iknow/qb/select-search.png
注：在加工过程中我只使用一把刀具，所以没有T指令。是后处理构造器问题吗？怎么用啊？？？？
你在后处理构造器里把自动换刀 的TM6 都删掉试试应该就不会有T02M6了是不是你在圆周运动 那里的IJK有个模态？ ”是“ 否 把否打勾试试 ，
页:
[1]