UG型腔铣生成刀路时经常出现：Object name: CAVITY_MILL Some regions were ignored
UG型腔铣，生成刀路的时候经常出现警报，新手求关注，老鸟戳进来，内容如下：---------- 诊断信息 ----------
---------- Object name: CAVITY_MILL---------------
Some regions were ignored because they are too small to engage.
Reducing the Minimum Ramp Length for engages or turning on Minimize Number of Engages can reduce these.
百度词典翻译内容是：
一些地区被忽略，因为它们太小，从事。Reducing the Minimum Ramp Length for engages or turning on Minimize Number of Engages can reduce these.减少的最小斜坡长度的接合或打开的最小数目的接合可以减少这些
该怎么解决啊？ 地方小了，刀进去不了，这是正常现象，不用理他 那加工的时候会不会出问题呀？这个警报经常跳出来，加工的时候，会不会过切啊？{:smile:}
页:
[1]