DMG DMU 50 Siemens 5X 840 postprocessor
Here, another interesting configuration from with good format of g-code output, include CIMCO probe compatibility.Unfortunately is completely binned.
Please share source code 🙏.
And enjoy.
Thanks for sharing! Thanks for sharing! 谢谢分享！ 需要知道自定义部分用的是哪个国家的语言，才能做出完美的源码
loop_var : 0 # 朽聍蛤 怵屐屙? 0 = 泥1 = 湾?<<< -- 团 膛瓦臆!!!!!!! -- >>>
#
tlchngtime : 13 # Tool Change Time (* in Seconds *)
#
is_ShowData : 0 # 项赅玎螯 溧眄 钺 铖?0 = 泥1 = 湾?
#
is_caption : 1 # 项赅玎螯 溧眄 钺 铖?0 = 泥1 = 湾?
#
is_proginit : 1 # 袜鬣腩 镳钽疣祆?
#
is_only4axis : 0 # 武眍怵屐屙磬 疣犷蜞 蝾朦觐 ?4-? 铖扈 1 = 泥0 = 湾?
#
is_progfinish : 1 # 暑礤?镳钽疣祆?
#
is_gotoup : 1 # 蔓躅??徨珙镟耥簋 镱玷鲨?
#
is_gotoup_plane : 0 # 腕驽?腓 恹躅??徨珙镟耥簋 镱玷鲨?耩噻?镱耠?CYCL DEF 19.
#
is_plane_spatial: 0 # 泽黻鲨 镫囗钼: 0 = 埋邈溧 0 - ROT
#
is_split : 1 # 锐镱朦珙忄螯 疣玟咫栩咫? 1 = 泥0 = 湾?
#
is_s34 : 1 # 锐镱朦珙忄螯 溻铋睇?赅恹麝??觐祆屙蜞痂?1 = 泥0 = 湾?
#
is_block : 1 # 蔓忸滂螯 岭铌 灶痨? 2 = 赅?觐祆屙蜞痂?1 = 泥0 = 湾?
#
var1 : 1 # 项耠邃钼囹咫铖螯 溴轳蜮栝 镱耠?耢屙?桧耱痼戾眚?
#
is_tooldef : 0 # 锐镱朦珙忄螯 TOOL DEF: 1 = 泥0 = 湾?
#
is_M1 : 1 # 锐镱朦珙忄螯 铖蜞眍?M1:1 = 泥0 = 湾?
#
is_M8 : 1 # 锐镱朦珙忄螯 铛豚驿屙桢 M8: 1 = 泥0 = 湾?
#
is_M7 : 1 # 锐?CYCL DEF 7.0 DATUM SHIFT: 1 = 泥0 = 湾?
#
is_M128 : 1 # 锐镱朦珙忄螯 M128: 1 = 泥0 = 湾?
#
is_M128wrt : 2 # 锐镱朦珙忄螯 M128: 0 = ?赅驿铋 铒屦圉梃, 1 = ?赅驿铋 铒屦圉梃 ?4 ?5-铋 铖扈,
# 2 = 蝾朦觐 ?5-蜩 铖邂 铒屦圉??
is_Twrt : 1 # 诣?恹忸溧 桧耱痼戾眚? 0 = 皖戾?+ ?, 1 = 袜玮囗桢 + ?
#
is_g32 : 1 # 泽黻鲨 蝾黜铖蜩 CYCL DEF 32: 1 = 泥0 = 湾?
#
is_M08 : 1 # 锐镱朦珙忄螯 CYCL DEF 8:1 = 泥0 = 湾?
#
is_M10 : 1 # 锐镱朦珙忄螯 CYCL DEF 10: 1 = 泥0 = 湾?
#
is5axis_drill : 1 # 锐镱朦珙忄螯 5axis_drill1 = 泥0 = 湾?
# 潆 纛痨桊钼囗? 镫囗?
#
is_3axis_rotary : 1 # 锐镱朦珙忄螯 p3axis_rotary 1 = 泥0 = 湾?
#
is_G321 : 0 # 玛膻麇龛?趔黻鲨?滂囡噻铐钼1 = 泥0 = 湾?
#
is_Zup_Zdn : 1 # 锐镱朦珙忄螯: 0 = Z 镱蝾?XY, 1 = XY 镱蝾?Z
#
is_axisnull : 1 # 锐镱朦珙忄螯 恹忸??眢朦 铖彘 1 = 泥0 = 湾?
#
is_nullaftertool: 0 # 锐镱朦珙忄螯 恹忸??眢腓 1 = 泥0 = 湾?
# 镱耠?耢屙?桧耱痼戾眚?
#
is_oldmachineref: 0 # 锐镱朦珙忄螯 恹忸??眢腓 1 = 泥0 = 湾?
# 铖彘 潆 耱囵 耱囗觐?
#
tool_info : 2 # Output tooltable information?
# 0 = Off - Do not output any tool comments or toolpable
# 1 = Tool comments only
# 2 = Tooltable in header - no tool comments at T/C
# 3 = Tooltable in header - with tool comments at T/C
is_vectornorm : 1 # 锐镱朦珙忄螯 忮牝铕 眍痨嚯?0 = 湾? 1 = 泥 ("A3=0", "B3=0", "C3=1")
#
is_ROT : 1 # 锐镱朦珙忄螯 ROT 0 = 湾? 1 = 泥
#
is_g832 : 2 # 锐镱朦珙忄螯 鲨觌 CYCLE832: 2 = New1 = 泥0 = 湾?
#
is_g800 : 1 # 锐镱朦珙忄螯 CYCLE800 0 = 湾? 1 = 泥
#
is_Wcoord : 0 # 锐镱朦珙忄螯 W 铖? 0 = 湾? 1 = 泥
#
is_l39 : 0 # 锐镱朦珙忄螯 0 = 湾? 1 = 泥
# ?镱滹痤沭囔爨 桤戾礤龛 觐痧尻鲨?磬 桧耱痼戾眚 镥疱?耢屙铋
# 桧耱痼戾眚?钺玎蝈朦眍 漕腈磬 猁螯 铗戾礤磬
#///////////////////////湾玎镳钽疣祆桊钼囗睇?趔黻鲨? ///////////////////////////////////
is_m99 : 0 # 锐镱朦珙忄螯 M99 0 = 湾? 1 = 泥
#
#/////////////////////// 湾玎镳钽疣祆桊钼囗睇?趔黻鲨? ///////////////////////////////////
is_g19_symbs : 2 # 殃铍?耔焘铍钼 恹忸滂螯 ?CYCL DEF 19 (2= A/B+0 C+0, 3= A+0 B+0 C+0)
is_feed_g19 : 0 # 锐镱朦珙忄螯 F 2 = ?耱痤赍 Q 镟疣戾蝠钼 1 = ?鲨觌?190 = 湾?
is_Qvar : 0 # 锐镱朦珙忄螯 Q 镥疱戾眄 1 = 泥0 = 湾?
# 镱耠?鲨觌?19
#
is_M110 : 0 # 锐镱朦珙忄螯 铖蜞眍?M110: 1 = 泥0 = 湾?
#
is_M247 : 0 # 锐镱朦珙忄螯 襻痤?耢妁屙? 2 = 蝾朦觐 ?玎泐腩怅?1 = 泥0 = 湾?
#
is_M126 : 0 # 锐镱朦珙忄螯 M126: 1 = 泥0 = 湾?
is_M126wrt : 4 # 锐镱朦珙忄螯: 4=袜 怦?镳钽疣祆? 3=?Q 镟疣戾蝠圊2=?骤觌?191=镱耠?恹珙忄 桧耱痼戾眚?
#
is_M25 : 0 # 锐镱朦珙忄螯 M25: 2 = 蝾朦觐 ?觐眦?酉 1 = 泥0 = 湾?
#
is_R0 : 0 # 锐镱朦珙忄螯 R0 镳?Z/A/B/C:1 = 泥0 = 湾?
#
is_M142incl : 0 #
# 不错，没有啥用 谢谢楼主分享 source code Thanks for sharing! 强众右强中瘦 发表于 2025-12-11 22:37
source code
Thank you Sir
页:
[1]
2