论坛 › UG后处理 › UG后处理程序头带刀具单与换刀前输出序列号N代码

天承 发表于 2016-9-25 21:23:25

这是好东西，过来学习下

lxy393720364 发表于 2016-9-25 21:35:38

新手求精，多多关照，谢谢谢谢

lxy393720364 发表于 2016-9-25 21:36:02

新手求粮，多多关照，谢谢谢谢

lxy393720364 发表于 2016-9-25 21:36:49

新手求教。多学习，谢谢

lxy393720364 发表于 2016-9-25 21:37:48

相互学习，共同进步!~

歸龍狄國 发表于 2016-9-26 14:56:44

非常实用，谢谢

youkiyou 发表于 2016-9-27 22:01:56

我来试验一下，不是水啊，好的话我也帮你顶

lv112116 发表于 2016-9-28 09:29:47

本帖最后由 lv112116 于 2016-9-28 09:35 编辑

为什么用不了

lv112116 发表于 2016-9-28 09:36:11

lv112116 发表于 2016-9-28 09:29
为什么用不了

%
O0001
(------------------------------------------------------)
(MILL               D          R          L          )
(------------------------------------------------------)
(T1==D10            10.000   0.000      50.000   )
(T1==D12            12.000   0.000      50.000   )
(NC-Dir==D:\o1.ptp)
(Part-Dir: C:\temp\_model1.prt)
(Time: Wed Sep 28 09:42:26 2016)
(BBS:www.ugsnx.com)
(Writer: Mr.liang)
G21
G17 G40 G49 G80
G91 G28 Z0.0
(Tool Name=D10 L=75.00mm R=0.00mm )
(Stock=0.000mm Floor=0.000mm)
N1   
T01 M06

lv112116 发表于 2016-9-28 09:38:07

***** A TCL Error Has Occurred *****
Event Handler: D:\ug10.0\an10.0\lsnsg11\mach\resource\postprocessor\9-181.tcl
Event: MOM_before_motion
Error Info: can't read "min_z": no such variable
    while executing
"if { $mom_pos(2) < $min_z } { set min_z $mom_pos(2) }"
    (procedure "PB_CMD_before_motion" line 17)
    invoked from within
"PB_CMD_before_motion "
    (procedure "MOM_before_motion" line 18)
    invoked from within
"MOM_before_motion"
Error Code: NONE
***** A TCL Error Has Occurred *****
Event Handler: D:\ug10.0\an10.0\lsnsg11\mach\resource\postprocessor\9-181.tcl
Event: MOM_before_motion
Error Info: can't read "min_z": no such variable
    while executing
"if { $mom_pos(2) < $min_z } { set min_z $mom_pos(2) }"
    (procedure "PB_CMD_before_motion" line 17)
    invoked from within
"PB_CMD_before_motion "
    (procedure "MOM_before_motion" line 18)
    invoked from within
"MOM_before_motion"
Error Code: NONE
***** A TCL Error Has Occurred *****
Event Handler: D:\ug10.0\an10.0\lsnsg11\mach\resource\postprocessor\wedm.tcl
Event: MOM_before_motion
Error Info: invalid command name "PB_first_cut"
    while executing
"PB_first_cut"
    ("FIRSTCUT" arm line 1)
    invoked from within
"switch $mom_motion_type {
      ENGAGE   {PB_CMD_kin_wedm_engage_move}
      APPROACH {PB_approach_move}
      FIRSTCUT {PB_first_cut}
      RETURN   ..."
    (procedure "MOM_before_motion" line 8)
    invoked from within
"MOM_before_motion"
Error Code: NONE
***** A TCL Error Has Occurred *****
Event Handler: D:\ug10.0\an10.0\lsnsg11\mach\resource\postprocessor\wedm.tcl
Event: MOM_before_motion
Error Info: invalid command name "PB_first_cut"
    while executing
"PB_first_cut"
    ("FIRSTCUT" arm line 1)
    invoked from within
"switch $mom_motion_type {
      ENGAGE   {PB_CMD_kin_wedm_engage_move}
      APPROACH {PB_approach_move}
      FIRSTCUT {PB_first_cut}
      RETURN   ..."
    (procedure "MOM_before_motion" line 8)
    invoked from within
"MOM_before_motion"
Error Code: NONE
***** A TCL Error Has Occurred *****
Event Handler: D:\ug10.0\an10.0\lsnsg11\mach\resource\postprocessor\9-181.tcl
Event: MOM_before_motion
Error Info: can't read "min_z": no such variable
    while executing
"if { $mom_pos(2) < $min_z } { set min_z $mom_pos(2) }"
    (procedure "PB_CMD_before_motion" line 17)
    invoked from within
"PB_CMD_before_motion "
    (procedure "MOM_before_motion" line 18)
    invoked from within
"MOM_before_motion"
Error Code: NONE

查看完整版本: UG后处理程序头带刀具单与换刀前输出序列号N代码