UG的stp导出
在使用ug过程中有没有遇到过导出stp文件后，会出现别的零件，不管是装配体还是零件，只要导出stp文件，就会多出来一个不相干的零件，求解决导出后变成都会多一个，但是打开creo的stp不会多，stp的模板也看过了是空白的，求解决
本帖最后由 warmth102 于 2025-7-10 20:50 编辑
去NX软件目录下找这几个*.prt，打开看一下有没有多余的体，有就删除。
还不解决问题就把上图列表中“ugstep214.def”这个文件用记事本的方式打开，删除里面所有代码，把下面这串代码粘贴进去保存。
CHOOSE_DIRECTION = STEP to UG
APPLICATION_PROTOCOL = AP214
CNV_MODE = On-Line
SAVE_DEF_FILE = step214ug.def
RECALL_DEF_FILE = step214ug.def
LOG_FILE = step214ug.log
MSG_MASK = Fatal,Severe,Error,Warning,Information,Status,Summary,Prefix
DSP_MASK = Fatal,Severe,Error,Warning,Information,Status,Summary,Prefix
Description =
Imp_Level = 1
File_Name =
Author =
Organization =
Authorization =
UGI_LAYERE_MASK =
UGI_LAYERD_MASK =
UGI_LAYER_MASK = 1-256
MODULES_MASK = Solids,Wireframe,Surfaces,PMI
PA_EDGE_FACE_BSPLINE_APPROX_TOL = 0.0254
SHORT_LONG_NAMES = Long
FILE_FILTER =
PROCESS_PART_LIST =
INDIVIDUAL_LIST =
ZERO_LAYER_DEFAULT = 1
AP214_DIS_OR_CD1 = IS
EXPORT_VALPROPS = Off
EXPORT_EXTERNAL_REFERENCES = Off
EXPORT_EXTERNAL_REFERENCE_FORMAT = STEP
AUTOMATIC_SURF_SEW = Off
ASSEMBLY_MAP = Off
UGI_PROC_ASSEM = Use load_options.def options
UGI_COMP_FAIL = Abort if Load Fails
UGI_LOAD_COMP = Load Components
UGI_LOAD_VER = Load Exact Version
UGI_COMP_SUB = Do not Allow Substitution
UGI_LOAD_OPTION = Load From Assem Dir
UGI_SEARCH_DIRS =
BASE_PART_MM = step214ugnull_mm.prt
BASE_PART_IN = step214ugnull_in.prt
BASE_PART_MICRON = step214ugnull_micron.prt
BASE_PART_METER = step214ugnull_meter.prt
CONVERT_STEP_FILES_TO =
遇到过，楼主找到问题说一下呗谢谢哒 warmth102 发表于 2025-7-10 20:47
去NX软件目录下找这几个*.prt，打开看一下有没有多余的体，有就删除。
可能是def文件出错了，stp模板没有问题 warmth102 发表于 2025-7-10 20:47
去NX软件目录下找这几个*.prt，打开看一下有没有多余的体，有就删除。
试了一下stp214导不出文件了，stp203导出还是有多余的体 dandna 发表于 2025-7-10 20:39
遇到过，楼主找到问题说一下呗谢谢哒
一楼说的用完ugstp214用不了了 本帖最后由 warmth102 于 2025-7-11 17:03 编辑
安然な 发表于 2025-7-11 11:50
试了一下stp214导不出文件了，stp203导出还是有多余的体你用这个代码试试
# ============================================================================================================
# Copyright Siemens Industry Software.All Rights Reserved
# =============================================================================================================
# This File contains the setting varibles along with their default values for step214 export
# =============================================================================================================
# Date Name Reason
# 13-Jan-2021Swapnil Jagatap Added PROCESS_HIDDEN_COMPONENT variable
# 18-Jun-2021Swapnil Jagatap Replaced PROCESS_HIDDEN_COMPONENT with PROCESS_HIDDEN_OBJECTS
# 11-Aug-2021Swapnil Jagatap Updated default value of PROCESS_HIDDEN_OBJECTS to No
# $HISTORY$
# =============================================================================================================
CHOOSE_DIRECTION = UG to STEP
CNV_MODE = On-Line
SAVE_DEF_FILE = ugstep214.def
RECALL_DEF_FILE = ugstep214.def
LOG_FILE = ugstep214.log
MSG_MASK = Fatal,Severe,Error,Warning,Information,Status,Summary,Prefix
DSP_MASK = Fatal,Severe,Error,Warning,Information,Status,Summary,Prefix
Description =
Imp_Level = 1
File_Name =
Author =
Organization =
Authorization =
UGI_LAYERE_MASK =
UGI_LAYERD_MASK =
UGI_LAYER_MASK = 1-256
MODULES_MASK = Solids
PA_EDGE_FACE_BSPLINE_APPROX_TOL = 0.0254
SHORT_LONG_NAMES = Long
FILE_FILTER =
PROCESS_PART_LIST =
INDIVIDUAL_LIST =
ZERO_LAYER_DEFAULT = 1
AP214_DIS_OR_CD1 = IS
EXPORT_VALPROPS = Off
EXPORT_EXTERNAL_REFERENCES = Off
AUTOMATIC_SURF_SEW = Off
ASSEMBLY_MAP = Off
UGI_PROC_ASSEM = Use load_options.def options
UGI_COMP_FAIL = Abort if Load Fails
UGI_LOAD_COMP = Load Components
UGI_LOAD_VER = Load Exact Version
UGI_COMP_SUB = Do not Allow Substitution
UGI_LOAD_OPTION = Load From Assem Dir
UGI_SEARCH_DIRS =
APPLICATION_PROTOCOL=AP214
PROCESS_HIDDEN_OBJECTS=No
warmth102 发表于 2025-7-11 16:45
你用这个代码试试
还是有，只能重装了
页:
[1]