PowerMill不能后处理了，怎么回事

三只小兔子

写入 NC 程序

Autodesk Manufacturing Post Processor Utility 2017 (SP2 CR 6.9.4510)
? Copyright 2017 Delcam Limited. All rights reserved.

Using option file: C:\Users\Administrator\Desktop\后处理\2017多轴后处理\FANUC15-4A.pmoptz

Reading cutfile records...
1 Records Processed (0 percent complete).
96 Records Processed (5 percent complete).
191 Records Processed (10 percent complete).
286 Records Processed (15 percent complete).
381 Records Processed (20 percent complete).
476 Records Processed (25 percent complete).
572 Records Processed (30 percent complete).
667 Records Processed (35 percent complete).
762 Records Processed (40 percent complete).
857 Records Processed (45 percent complete).
953 Records Processed (50 percent complete).
1048 Records Processed (55 percent complete).
1143 Records Processed (60 percent complete).
1238 Records Processed (65 percent complete).
1238 Records Processed (65 percent complete).
error NCB0233: Can't reach desired tool direction (-.987, .159, -.004).
Location:
    object: ToolpathMilling, function: AddMoveMxs, toolpath: SY002_1
    object: Program
    object: ProgramBuilderNC
    record: #313 (5000 / 5)
    object: CLDATAReader, function: ReadCLDATA
Complete

写入NC程序
NC程序： C:/Users/Administrator/Desktop/SY002_1.tap

Toolpath SY002_1
不能进行后处理。




各位老师帮我看看。为什么不能后处理了？

win3333

请问您不能后处理解决了吗？我的现在也报相同的错误。

阿瑞瑞

楼主请问解决了吗

389413430

世界坐标系Z 方向和你编程坐标系不在同一个方向