3-axis coordinate round trip POST - TEST version

vampvamp · 发表于 2025-12-18 10:07:51

I created this using the MPMASTER version.
The NC data is accurate,
but I haven't been able to perform actual machining yet.

Please note that only six coordinates, G54 through G59, can be used for reciprocating machining.

From that point on, machining is sequential.

MPMASTER_ZIGZAG.zip (56.26 KB, 下载次数: 42)

xinruyu369 · 发表于 2025-12-18 11:44:43

带刀单，不错

mayzhang1024 · 发表于 2025-12-18 12:08:41

谢谢分享，学习一下。

Ngdoankete · 发表于 2025-12-18 22:30:32

谢谢分享

强众右强中瘦 · 发表于 2025-12-19 00:19:23

Thank you for sharing

18995823132 · 发表于 2025-12-19 08:02:06

谢谢分享

三里清风三里地 · 发表于 2025-12-19 10:16:43

谢谢分享

Jebens · 发表于 2025-12-19 11:09:36

好东西！

/ty旭馹鶇昇 · 发表于 2025-12-19 15:15:39

谢谢分享，学习一下。

		自动登录	找回密码
密码			立即注册

[分享] 3-axis coordinate round trip POST - TEST version

相关帖子