UG车床，刀尖圆弧和刀尖跟踪点方位，后处理变量

CAOWEI19860

有没有大神能告知，UG车床编程中，把刀尖圆角（R0.8）和刀尖方位（车加工里面设定的跟踪点，1~9个方位）写到后处理里面。

Frank_yangkee

mom_tool_angle

Angle from 0-360
Describes the angular direction from the center of the lathe tool to the tool tip.   The mom_tool angle and the the mom_tool_radius define the vector from the tool nose center to the tracking point.  This value is only useful if the tracking point is tool nose center, otherwise the mom_pos values contain this offset value.