UG的stp导出

安然な

在使用ug过程中有没有遇到过导出stp文件后，会出现别的零件，不管是装配体还是零件，只要导出stp文件，就会多出来一个不相干的零件，求解决

导出后变成都会多一个，但是打开creo的stp不会多，stp的模板也看过了是空白的，求解决

warmth102

去NX软件目录下找这几个*.prt，打开看一下有没有多余的体，有就删除。


还不解决问题就把上图列表中“ugstep214.def”这个文件用记事本的方式打开，删除里面所有代码，把下面这串代码粘贴进去保存。

1. CHOOSE_DIRECTION = STEP to UG
   
2. APPLICATION_PROTOCOL = AP214
   
3. CNV_MODE = On-Line
   
4. SAVE_DEF_FILE = step214ug.def
   
5. RECALL_DEF_FILE = step214ug.def
   
6. LOG_FILE = step214ug.log
   
7. MSG_MASK = Fatal,Severe,Error,Warning,Information,Status,Summary,Prefix
   
8. DSP_MASK = Fatal,Severe,Error,Warning,Information,Status,Summary,Prefix
   
9. Description =
   
10. Imp_Level = 1
    
11. File_Name =
    
12. Author =
    
13. Organization =
    
14. Authorization =
    
15. UGI_LAYERE_MASK =
    
16. UGI_LAYERD_MASK =
    
17. UGI_LAYER_MASK = 1-256
    
18. MODULES_MASK = Solids,Wireframe,Surfaces,PMI
    
19. PA_EDGE_FACE_BSPLINE_APPROX_TOL = 0.0254
    
20. SHORT_LONG_NAMES = Long
    
21. FILE_FILTER =
    
22. PROCESS_PART_LIST =
    
23. INDIVIDUAL_LIST =
    
24. ZERO_LAYER_DEFAULT = 1
    
25. AP214_DIS_OR_CD1 = IS
    
26. EXPORT_VALPROPS = Off
    
27. EXPORT_EXTERNAL_REFERENCES = Off
    
28. EXPORT_EXTERNAL_REFERENCE_FORMAT = STEP
    
29. AUTOMATIC_SURF_SEW = Off
    
30. ASSEMBLY_MAP = Off
    
31. UGI_PROC_ASSEM = Use load_options.def options
    
32. UGI_COMP_FAIL = Abort if Load Fails
    
33. UGI_LOAD_COMP = Load Components
    
34. UGI_LOAD_VER = Load Exact Version
    
35. UGI_COMP_SUB = Do not Allow Substitution
    
36. UGI_LOAD_OPTION = Load From Assem Dir
    
37. UGI_SEARCH_DIRS =
    
38. BASE_PART_MM = step214ugnull_mm.prt
    
39. BASE_PART_IN = step214ugnull_in.prt
    
40. BASE_PART_MICRON = step214ugnull_micron.prt
    
41. BASE_PART_METER = step214ugnull_meter.prt
    
42. CONVERT_STEP_FILES_TO =

复制代码

dandna

遇到过，楼主找到问题说一下呗谢谢哒

安然な

warmth102 发表于 2025-7-10 20:47
去NX软件目录下找这几个*.prt，打开看一下有没有多余的体，有就删除。

可能是def文件出错了，stp模板没有问题

安然な

warmth102 发表于 2025-7-10 20:47
去NX软件目录下找这几个*.prt，打开看一下有没有多余的体，有就删除。

试了一下stp214导不出文件了，stp203导出还是有多余的体

安然な

dandna 发表于 2025-7-10 20:39
遇到过，楼主找到问题说一下呗谢谢哒

一楼说的用完ugstp214用不了了

warmth102

安然な 发表于 2025-7-11 11:50
试了一下stp214导不出文件了，stp203导出还是有多余的体

你用这个代码试试

1. # ============================================================================================================
   
2. 
   
3. # Copyright Siemens Industry Software.  All Rights Reserved
   
4. 
   
5. # =============================================================================================================
   
6. 
   
7. # This File contains the setting varibles along with their default values for step214 export
   
8. 
   
9. # =============================================================================================================
   
10. # Date         Name                  Reason
    
11. # 13-Jan-2021  Swapnil Jagatap       Added PROCESS_HIDDEN_COMPONENT variable
    
12. # 18-Jun-2021  Swapnil Jagatap       Replaced PROCESS_HIDDEN_COMPONENT with PROCESS_HIDDEN_OBJECTS
    
13. # 11-Aug-2021  Swapnil Jagatap       Updated default value of PROCESS_HIDDEN_OBJECTS to No
    
14. # $HISTORY$
    
15. # =============================================================================================================
    
16. CHOOSE_DIRECTION = UG to STEP
    
17. CNV_MODE = On-Line
    
18. SAVE_DEF_FILE = ugstep214.def
    
19. RECALL_DEF_FILE = ugstep214.def
    
20. LOG_FILE = ugstep214.log
    
21. MSG_MASK = Fatal,Severe,Error,Warning,Information,Status,Summary,Prefix
    
22. DSP_MASK = Fatal,Severe,Error,Warning,Information,Status,Summary,Prefix
    
23. Description =
    
24. Imp_Level = 1
    
25. File_Name =
    
26. Author =
    
27. Organization =
    
28. Authorization =
    
29. UGI_LAYERE_MASK =
    
30. UGI_LAYERD_MASK =
    
31. UGI_LAYER_MASK = 1-256
    
32. MODULES_MASK = Solids
    
33. PA_EDGE_FACE_BSPLINE_APPROX_TOL = 0.0254
    
34. SHORT_LONG_NAMES = Long
    
35. FILE_FILTER =
    
36. PROCESS_PART_LIST =
    
37. INDIVIDUAL_LIST =
    
38. ZERO_LAYER_DEFAULT = 1
    
39. AP214_DIS_OR_CD1 = IS
    
40. EXPORT_VALPROPS = Off
    
41. EXPORT_EXTERNAL_REFERENCES = Off
    
42. AUTOMATIC_SURF_SEW = Off
    
43. ASSEMBLY_MAP = Off
    
44. UGI_PROC_ASSEM = Use load_options.def options
    
45. UGI_COMP_FAIL = Abort if Load Fails
    
46. UGI_LOAD_COMP = Load Components
    
47. UGI_LOAD_VER = Load Exact Version
    
48. UGI_COMP_SUB = Do not Allow Substitution
    
49. UGI_LOAD_OPTION = Load From Assem Dir
    
50. UGI_SEARCH_DIRS =
    
51. APPLICATION_PROTOCOL=AP214
    
52. PROCESS_HIDDEN_OBJECTS=No

复制代码